the abc 150 series of open - frame power supplies, with its wide universal 90 - 264 vac input range and high power density, is available at 150 w of output power and a variety of single output voltages. the high efficiency and high power density of the abc family ensures minimal power loss in end - use equipment, thereby facilitating higher reliability, easier thermal management and meets regulato ry approvals for environmentally - friendly end products. these power supplies are ideal for telecom, datacom, industrial equipment and other applications. ? 4 x 2 x 1. 3 inch form f actor ? 150 w with forced - air cooling ? 12 v @ 0.5 a fan voltage auxiliary output ? high efficiency > 86% low conducted and radiated noise ? light weight ? iec protection class options: ? class i: earthing tab j4 (no suffix) ? class ii: no earthing tab ( - 2 suffix) ? cover kit accessory available ? rohs compliant ? instrumentation ? lighting ? industrial applications ? applied computing ? renewable energy ? test and measurement ? robotics ? wireless communication
2 a bc150 series tech.support@psbel.com model 1 connector output voltage max load convection 2 max load 300 lfm 2, 3 , 4 minimum load ripple & noise 5 abc 150 - 1005g jst 5 vdc 16.0 a 16.0 a 0.0 a 1% abc 150 - 1 t 05g screw terminal 5 vdc 16.0 a 20.0 a 0.0 a 1% abc 150 - 1012g jst 12 vdc 8.33 a 12.5 a 0.0 a 1% abc 150 - 1 t 12g screw terminal 12 vdc 8.33 a 12.5 a 0.0 a 1% abc 150 - 1015g jst 15 vdc 6.67 a 10.0 a 0.0 a 1% abc 150 - 1 t 15g screw terminal 15 vdc 6.67 a 10.0 a 0.0 a 1% abc 150 - 1024g jst 24 vdc 4.17 a 6.25 a 0.0 a 1% abc 150 - 1 t 24g screw terminal 24 vdc 4.17 a 6.25 a 0.0 a 1% abc 150 - 1048g jst 48 vdc 2.08 a 3.13 a 0.0 a 1% abc 150 - 1 t 48g screw terminal 48 vdc 2.08 a 3.13 a 0.0 a 1% cover - 201 - xbc 6 metal cover kit accessory specifications are for nominal input voltage, 25c unless otherwise stated. parameter description / condition specification input voltage universal 90 - 264 vac / 120 - 390 vdc input frequency 47 to 63 hz input current 120 vac: 230 vac: 1.7 a max. 0.85 a max. no load power 1.2 w inrush current 120 vac: 230 vac: 35 a max. 65 a max. leakage current 120 vac: 230 vac: < 15 0 a < 30 0 a power factor 120 vac: 230 vac: 0.99 0.95 switching frequency pfc converter (variable) resonant converter (variable) 35 - 250 khz, 90 khz typical 35 - 250 khz, 90 khz typical 1 for class ii (without input earth pin) add suffix - 2 (e.g.: abc150 - 1012g - 2). 2 combined output power from v1, vstby and vfan should not exceed the total output power rating. 3 fan output voltage tolerance is +/ - 20%. 4 peak current for fan output is 1 a. 5 ripple is 2% up to 20% load and < 1% above 20% load. ripple is peak to peak with 20 mhz bandwidth and 10 f (tantalum capacitor) in parallel with a 0.1 f capacitor at rated line voltage and load ranges. 6 when used in cover kit, de - rate output power to 7 0 % under all operating conditions.
a bc150 series 3 asia - pacific +86 755 298 85888 europe, middle east +353 61 225 977 north america +1 408 785 5200 ? 201 7 bel power solutions & protection bcd.00283 _a e parameter description / condition specification output power derate output power linearly to 80% from 90 vac to 80 vac input peak power 170 w for 0.2 s 150 w efficiency 120 vac: 230 vac: 84% typical 86% typical hold up time 120 vac: 230 vac: 6 ms 10 ms line regulation +/ - 0.5% load regulation +/ - 2.0% transient response main output 50 to 100% load change, 50 hz, 50% duty cycle, 0.1a / s < 10%, recovery time < 5 ms rise time < 100 ms set point accuracy main output 1% voltage adjustment v1 3 % over current protection 110% typical above rating over voltage protection v1 110 to 150% short circuit protection short term, automatic recovery parameter description / condition specification operating temperature refer to derating curve s start - up is guaranteed - 20 to 70c - 20 to 0c storage temperature - 40 to 70 c cooling 5 v model other models convection: 300 lfm: convection: 300 lfm: 80 w 100 w 100 w 150 w humidity non condensing 95% altitude operating: non - operating: 10,000 ft. 40,000 ft. reliability mtbf according to telcordia - sr332 - issue 3 2.4 million hours conducted emissions en55032 - b, cispr22 - b, fcc part15 - b pass radiated emissions en 55032 a; with external core (king core k5b rc 25x12x15 - m in input cable) pass level b input current harmonics en 61000 - 3 - 2 class d voltage fluctuation and flicker en 61000 - 3 - 3 pass esd immunity en 61000 - 4 - 2 level 3, criterion a radiated field immunity en 61000 - 4 - 3 level 3, criterion a electrical fast transient immunity en 61000 - 4 - 4 level 3, criterion a surge immunity en 61000 - 4 - 5 level 3, criterion a conducted immunity en 61000 - 4 - 6 level 3, criterion a magnetic field immunity en 61000 - 4 - 8 level 3, criterion a voltage dips, interruptions en 61000 - 4 - 11 criterion a & b
4 a bc150 series tech.support@psbel.com parameter description / condition specification isolation voltage input to output: min. 4242 vdc safety standards approved to the latest edition of the following standards: csa/ul60950 - 1, en60950 - 1 and iec60950 - 1 agency approvals nemko, ul, c - ul ce mark complies with lvd directive connector pin description / condition manufacturer / pn ac input connector j1 pin 1 pin 2 ac line ac neutral molex: 26 - 60 - 4030 or equivalent mating: 09 - 50 - 3031; pins: 08 - 50 - 0106 dc output connector j2 pin 1,2 pin 3,4 v1 rtn option - 1: tyco: 1776112 - 4 or equivalent mating: 13 awg wire option - 2: jst: b4p - vh - b (lf) (sn) or b4p - vh (lf) (sn) or equivalent mating: vhr - 4m; pins: svh - 41t - p1.1 fan j3 pin 1 pin 2 vfan (12 v / 0.5 a) rtn tyco: 640456 - 2 or equivalent mating: 640440 - 2 earthing tab j4 molex: 19705 - 4301 or equivalent mating: 190030001 parameter description / condition weight 150 g (0.33 lbs.) dimensions 101.6 x 50.8 x 33.6 mm (4.0 x 2.0 x 1.3 inch) figure 1 - mechanical drawing
a bc150 series 5 asia - pacific +86 755 298 85888 europe, middle east +353 61 225 977 north america +1 408 785 5200 ? 201 7 bel power solutions & protection bcd.00283 _a e notes: in case the pcb is mounted in a metal enclosure, using metal hardware ensure the following : 1 stand off, used to mount pcb has od of 5.4 mm max. 2 screws, used to fix pcb on stand off, have head dia of 6.0 mm max. 3 washer, if u sed, to have dia of 6.5 mm max. convection load: 80 w up to 50 c de - rate above 50 c @ 3.125% per c forced air cooled load: 100w up to 50c de - rate above 50 c @ 2.5% per c convection load: 100 w up to 50 c de - rate above 50 c @ 2.5% per c forced air cooled load : 150 w up to 50c de - rate above 50 c @ 1.67% per c figure 2 . derating curve s nuclear and medical applications - products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. technical revisions - the appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. specifications are subject to change without notice.
|
